leqephe_banner

6061 Aluminium Alloy Coil bakeng sa Kaho ea Kaho e Sebelisitsoeng

6061 Aluminium Alloy Coil bakeng sa Kaho ea Kaho e Sebelisitsoeng

Tlhaloso e Khutšoanyane:

Koele ea aluminiumke sehlahisoa se kolobisitsoeng se entsoeng ka aluminium joalo ka thepa ea mantlha e tala. E na le litšobotsi tsa boima bo bobebe, ho hanyetsa kutu le conductivity e ntle ea mocheso. Li-coil tsa aluminium li sebelisoa haholo kahong, lipalangoang, lisebelisoa tsa elektroniki, ho paka le masimong a mang.

Ts'ebetso ea tlhahiso ea li-coil tsa aluminium e kenyelletsa ho lokisoa ha thepa e tala, mokelikeli oa aluminium o qhibilihang, ho lahla le ho roala ho tsoelang pele, ho tima le ho koala, ho koahela le mehato e meng. Taolo e tiileng ea hlokahala nakong ea ts'ebetso ea tlhahiso ho netefatsa hore boleng ba sehlahisoa le ts'ebetso e fihlella litlhoko tse tloaelehileng.

Mabapi le liphutheloana le lipalangoang, li-coil tsa aluminium hangata li kenngoa ka pallets ea lepolanka kapa mabokose 'me li ajoa ka lipalangoang tsa mobu, leoatle kapa terene. Nakong ea lipalangoang, tlhokomelo e lokela ho nkoa ho qoba pula, letsatsi le tobileng, le mocheso o phahameng ho qoba ho ama boleng ba sehlahisoa.

Joalo ka thepa e bobebe, e hananang le kutu, likhoele tsa aluminium li sebelisoa haholo kahong, lipalangoang, lisebelisoa tsa elektroniki, ho paka le masimo a mang. Thepa ea eona e ntle e etsa hore e be e 'ngoe ea lisebelisoa tsa bohlokoa liindastering tse fapaneng.


  • Nomoro ea Mohlala:1050/1060/1070/1100/3003/5052/5083/6061/6063
  • Bophara:100-2000 limilimithara
  • Alloy kapa Che:Ke Alloy
  • Bohale:O - H112
  • Tshebeletso ya ho sebetsa:Ho koba, ho qhibidiha, ho tjheseletsa, ho phunya, ho seha
  • Kopo:Kaho
  • Tloaelo:ASTM AISI JIS DIN GB
  • Sehlopha sa Tefo:30% T / T Advance + 70% Balance
  • Delibari:Matsatsi a 7-15
  • Lintlha tsa Sehlahisoa

    Li-tag tsa Sehlahisoa

    Lintlha tsa Sehlahisoa

    khoele ea aluminium

    1) 1000 Series Alloy (Ka kakaretso e bitsoa aluminium e hloekileng ea khoebo, Al> 99.0%)
    Bohloeki
    1050 1050A 1060 1070 1100
    Khalefo
    O/H111 H112 H12/H22/H32 H14/H24/H34 H16/
    H26/H36 H18/H28/H38 H114/H194, joalo-joalo.
    Tlhaloso
    Botenya≤30mm; Bophara≤2600mm; Bolelele≤16000mm KAPA Khoele (C)
    Kopo
    Lid Stock, Sesebelisoa sa Indasteri, Polokelo, Mefuta Eohle ea Lijana, jj.
    Sebopeho
    Lid Shigh conductivity, tshebetso e ntle e thibelang kutu, mocheso o phahameng o patehileng
    ea ho qhibiliha, e khanyang haholo, thepa ea ho cheselletsa hantle, matla a fokolang, 'me ha ho joalo
    e loketseng bakeng sa phekolo ea mocheso.

     

    2) 3000 Series Alloy (Ka kakaretso e bitsoa Al-Mn Alloy, Mn e sebelisoa e le ntho e ka sehloohong ea motsoako)
    Alloy
    3003 3004 3005 3102 3105
    Khalefo
    O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/
    H36 H18/H28/H38 H114/H194, joalo-joalo.
    Tlhaloso
    Botenya≤30mm; Bophara≤2200mm Bolelele≤12000mm KAPA Khoele (C)
    Kopo
    Mokhabiso, sesebelisoa sa mocheso oa mocheso, marako a ka ntle, polokelo, maqephe a kaho, joalo-joalo.
    Sebopeho
    Ho hanyetsa mafome hantle, ha hoa lokela ho phekoloa mocheso, ho thibela ho bola hamonate
    ts'ebetso, thepa ea welding hantle, polasetiki e ntle, matla a tlase empa a loketse
    bakeng sa ho sebetsa ka thata

     

    3) 5000 Series Alloy (Ka kakaretso e bitsoa Al-Mg Alloy, Mg e sebelisoa e le ntho ea mantlha ea alloy)
    Alloy
    5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06
    Khalefo
    O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34
    H16/H26/H36 H18/H28/H38 H114/H194, joalo-joalo.
    Tlhaloso
    Botenya≤170mm; Bophara≤2200mm ; Bolelele≤12000mm
    Kopo
    Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile
    Lishiti tsa 'mele, Boto ea Ka hare ho Koloi, Sekoaelo sa Tšireletso Ea Enjene.
    Sebopeho
    Melemo eohle ea alloy e tloaelehileng ea aluminium, matla a phahameng a tensile & matla a tlhahiso,
    ts'ebetso e ntle e thibelang kutu, thepa e chesehang hantle, matla a mokhathala,
    mme e loketse bakeng sa anodic oxidation.

     

    4) 6000 Series Alloy (Ka kakaretso e bitsoa Al-Mg-Si Alloy, Mg le Si li sebelisoa e le likarolo tse ka sehloohong tsa motsoako)
    Alloy
    6061 6063 6082
    Khalefo
    OF, joalo-joalo.
    Tlhaloso
    Botenya≤170mm; Bophara≤2200mm ; Bolelele≤12000mm
    Kopo
    Likoloi, Aluminium Bakeng sa Lifofane, Mould oa Indasteri, Lisebelisoa tsa Mechini,
    Sekepe sa Lipalangoang, Lisebelisoa tsa Semiconductor, joalo-joalo
    Sebopeho
    Ts'ebetso e ntle e thibelang kutu, thepa e chesehang hantle, oxidability e ntle,
    ho bonolo ho fafatsa-ho qeta, 'mala oa oxidation hantle, machinability e ntle.
    KILE
    khoele (5)
    khoele (4)

    Kopo e ka Sehloohong

    QQ图片20221129105521

    Joalo ka lisebelisoa tse nang le mesebetsi e mengata, likhoele tsa aluminium li na le mefuta e mengata ea ts'ebeliso libakeng tse fapaneng.

    Pele ho tsohle, tšimong ea kaho, li-coil tsa aluminium li atisa ho sebelisoa ho haha ​​​​mokhabiso oa ka ntle oa lerako, marulelo, siling, liforeimi tsa lifensetere, joalo-joalo Hobane li-coil tsa aluminium li na le ho hanyetsa boemo ba leholimo bo botle le thepa e khabisitsoeng, li ka finyella litlhoko tsa ponahalo le nako e telele. meaho.

    Ea bobeli, tšimong ea lipalangoang, li-coil tsa aluminium li atisa ho sebelisoa ho etsa likhetla, liphanele tsa 'mele, likarolo tse ka hare, joalo-joalo tsa likoloi tse kang likoloi, literene le lifofane. Boemo bo bobebe ba li-coil tsa aluminium bo thusa ho fokotsa boima ba koloi ka kakaretso le ho ntlafatsa ts'ebetso ea mafura.

    Ho phaella moo, tšimong ea lisebelisoa tsa elektronike le tsa motlakase, li-coil tsa aluminium li atisa ho sebelisoa ho etsa linyeoe tsa betri, li-radiator, li-casings tsa lihlahisoa tsa elektronike, joalo-joalo The conductivity ea motlakase le thepa ea ho senya mocheso ea li-coil tsa aluminium e etsa hore e be ntho ea bohlokoa ho lisebelisoa tsa elektronike le tsa motlakase. indasteri.

    Ho phaella moo, tšimong ea liphutheloana, li-coil tsa aluminium li boetse li sebelisoa haholo ho paka lijo, liphutheloana tsa meriana, joalo-joalo Hobane li-coil tsa aluminium li na le ho tiisa hantle le ho hanyetsa oxidation, li ka sireletsa ka katleho boleng le polokeho ea lintho tse pakiloeng.

    Ka kakaretso, likhoele tsa aluminium li na le lits'ebetso tsa bohlokoa ho tsa kaho, lipalangoang, lisebelisoa tsa elektroniki, liphutheloana le masimong a mang. Boima ba eona bo bobebe, ho hanyetsa kutu, le ho sebetsa habonolo ho etsa hore e be e 'ngoe ea lisebelisoa tsa bohlokoa liindastering tse fapaneng. .

    Chate ea boholo

    WIDTH(MM)

    (mm)

    (mm)

    (mm)

    (mm)

    (mm)

    1000

    1

    2

    3

    4

    Tse ding

    1219

    1

    2

    3

    4

    Tse ding

    1220

    1

    2

    3

    4

    Tse ding

    1500

    1

    2

    3

    4

    Tse ding

    2000

    1

    2

    3

    4

    Tse ding

    Mokhoa oa Tlhahiso 

    Tlhahiso eahangata e tsamaea ka mehato e mengata. Ntlha ea pele, ho qala ka li-ingots tsa aluminium, ka ho qhibiliha le ho lahla ka mokhoa o sa khaotseng, aluminium ea metsi e finyellang litlhoko e fumanoa. Ka mor'a moo, aluminium e entsoeng ka ho qhibilihisoa e lahleloa ka har'a letlapa la aluminium ka mokhoa o tsoelang pele oa ho lahla le ho bilika, ebe botenya bo fokotseha butle-butle ka mochine o bilikang o tsoelang pele ho etsa khoele ea aluminium e hlokahalang. Ka mor'a moo, khoele ea aluminium e tima 'me e kenngoa ho lokisa sebopeho sa eona le thepa ea eona le ho ntlafatsa matla le polasetiki ea eona. Qetellong, li-coil tsa aluminium li ka koaheloa ho eketsa khanyetso ea kutu kapa thepa e khabisitsoeng holim'a tsona. Ts'ebetso eohle ea tlhahiso e hloka taolo e tiileng ho netefatsa hore boleng ba sehlahisoa le ts'ebetso e fihlella litlhoko tse tloaelehileng. Ka nako e ts'oanang, ts'ireletso ea tikoloho, tšebeliso ea matla le likarolo tse ling le tsona ke litaba tse lokelang ho tsepamisoa nakong ea ts'ebetso ea tlhahiso.

    T$M50BGG[``THFHXJ`CHSW0

    SehlahisoaItlhahlobo

    Lintlha tse ling tsa bohlokoa tseo u ka li nahanang ha u hlahloba ke tsena:

    1. Size: Hlahloba boholo bakhahlano le lintlha tse fanoeng ke moetsi. Etsa bonnete ba hore ke botenya bo nepahetseng, bophara le bolelele.

    2. Boleng ba bokaholimo: Lekola bokaholimo ba khoele bakeng sa mengoapo, bofokoli kapa bofokoli bo bong. Bokaholimo bo lokela ho ba boreleli ntle le tšenyo e bonahalang.

    3. Ho lumellana ha mebala: 'mala oa coil o lokela ho ba o tsitsitseng ho pholletsa le coil. Phetoho leha e le efe ea 'mala e ka bontša bothata ka mokhoa oa tlhahiso.

    4. Botenya ba ho roala: Haeba coil e na le seaparo, botenya ba ho roala bo lokela ho hlahlojoa ho netefatsa hore bo finyella litlhoko tse boletsoeng. Liaparo tse tšesaane haholo kapa tse teteaneng haholo li ka ama ho tšoarella le ho sebetsa ha sehlahisoa.

    5. Sebopeho sa lik'hemik'hale: hlahloba lik'hemik'hale tsa aluminium ho netefatsa hore li finyella litekanyetso tse hlokahalang. Sena se kenyeletsa ho hlahloba litšila kapa likarolo tse ling tse ka amang boleng ba sehlahisoa.

    6. Ho Paka le ho Ngola: Etsa bonnete ba hore lirolo li phuthetsoe hantle 'me li ngotsoe bakeng sa ho romelloa le ho bolokoa. Sephutheloana se lokela ho ba matla 'me se etselitsoe ho sireletsa khoele nakong ea ho tsamaisa.

    7. Ts'ebetso ea Tlhahiso: Ts'ebetso ea tlhahiso e hlahlojoa ho netefatsa hore e finyella litekanyetso tse hlokahalang le hore lisebelisoa tsohle li hlokomeloa le ho sebetsa hantle.

    Ts'ebetso e sebetsang ea tlhahlobo e tla thusa ho tseba mathata afe kapa afe a ka bang teng ka sehlahisoa le ho netefatsa hore se fihlela maemo a hlokahalang a boleng.

    khoele (2)
    khoele (3)

    Ho Paka le Lipalangoang

    Ho paka ka kakaretso ho hlobotse, ho tlama terata ea tšepe, ho matla haholo.

    Haeba u na le litlhoko tse khethehileng, u ka sebelisa liphutheloana tse thibelang mafome, 'me li ntle ho feta.

    Lipalangoang:Express (Sample Delivery), Air, Rail, Land, Sea ship (FCL kapa LCL kapa Bulk)

    koela (6)
    1 (4)

    Moreki oa rona

    koala (7)

    LBH

    P: Na moetsi oa ua?

    A: E, re moetsi oa li-tube tsa tšepe tse lulang motseng oa Daqiuzhuang, motseng oa Tianjin, Chaena.

    P: Na nka fuoa taelo ea teko feela lithane tse 'maloa?

    A: Ehlile. Re ka romella thepa bakeng sa hau ka LCL serivece.(Moroalo o fokolang oa setshelo)

    P: Na u na le boemo bo holimo ba tefo?

    A: Bakeng sa taelo e kholo, matsatsi a 30-90 L / C a ka amoheleha.

    P: Haeba sampole e lokolohile?

    A: Mohlala oa mahala, empa moreki o lefella thepa.

    P: Na u morekisi oa khauta 'me u etsa tiisetso ea khoebo?

    A: Re lilemo tse supileng tse batang mofani oa thepa 'me re amohela tiisetso ea khoebo.


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona