Khoele ea Tšepe ea Silicon e Tšepe ea Wholesale IEC 60404-8-4 e Talimang Lijo-thollo (GO) – Moetsi le Mofani oa Tšepe ea Transformer le Motor Core e Sebetsang ka Botlalo bo Holimo

IEC 60404-8-4 Coil ea Tšepe ea Silicon e Ikemiselitsoeng ho Lijo-thollo (GO) - Transformer e Sebetsang Haholo le Tšepe ea Core ea Motlakase

IEC 60404-8-4 Coil ea Tšepe ea Silicon e Otlolohileng ka Mafura (GO) - Transformer e Sebetsang ka Botlalo le Tšepe ea Core ea Motlakase Setšoantšo se Hlahisitsoeng

Tlhaloso e Khutšoanyane:

IEC 60404-8-4 Khoele ea Tšepe ea Silicon e Shebaneng le Lithollo (GO)ke tšepe ea motlakase e sebetsang hantle e etselitsoeng li-core tsa transformer le tsa motlakase. E entsoe ho latelaMaemo a machaba a IEC 60404-8-4, tšepe ena ea silicon ea GO e fana ka thepa e ntle ea makenete, tahlehelo e tlase ea mantlha, le ho kenella ho phahameng ha metsi, ho netefatsa ts'ebetso e ntle ea matla le ts'epo ea nako e telele lisebelisoa tsa motlakase.

Maemo a Tloaelehileng:IEC 60404-8-4

Mofuta:Silicone ea Motlakase e Ratang e Tsamaisang Lithollo (GOES)

Botenya:0.35mm / 0.50mm (E fumaneha ka mokhoa o ikhethileng)

Bophara:800–1250mm (Tšebeletso ea ho seha e ea fumaneha)

Kopo:Motlakase oa Transformer, Motlakase, Jenereithara

Romella imeile ho rona WhatsApp Imeile

Qaqiso ea Sehlahisoa

Li-tag tsa Sehlahisoa

Lintlha tse akaretsang

Ntho	Tlhaloso
Lebitso la Sehlahisoa	IEC 60404-8-4 Khoele ea Tšepe ea Silicon e Shebaneng le Lithollo (GO)
Mofuta oa Tšepe	Tšepe ea Motlakase e Lebisitsoeng ho Lijo-thollo (GOES)
Mokhoa oa Tlhahiso	E phutholohile ka serame, e koahetsoe ka botlalo
E tloaelehileng	IEC
Likopo tse Tloaelehileng	Li-cores tsa Transformer, Li-motor, Lijenereithara, Li-Inductor

Sebopeho sa Lik'hemik'hale (Se Tloaelehileng)

Karolo	Dikahare (boima%)	Tlhaloso
Si (Silicone)	2.8 – 3.5	E ntlafatsa thepa ea makenete 'me e fokotsa tahlehelo ea mantlha
C (Khabone)	≤ 0.005	Khabone e tlase bakeng sa tataiso e ntle ea makenete
Mn (Manganese)	≤ 0.30	E ntlafatsa matla a mechini
S (Sebabole)	≤ 0.005	Sebabole se tlase ho fokotsa ho robeha ha bonolo
P (Fosforase)	≤ 0.03	E boloka botsitso ba thepa
Fe (Tšepe)	Tekanyo	Tšepe ea motheo ea coil ea tšepe ea silicon
Tse ling	≤ 0.02	E kenyelletsa likarolo tse latelang tse kang Al, Cu, Cr

Thepa ea 'Mele le ea Magnetic

Sehlopha	Thepa	Boleng bo Tloaelehileng / bo Boletsweng	Lintlha
Mofuta oa Tšepe	Sebopeho sa Lik'hemik'hale	~3.0–3.2 % Si, C e tlase	E etselitsoe tahlehelo e tlase ea mantlha le ho kenella ha matla a khoheli ho phahameng
Litekanyo tsa 'Mele	Botenya	0.18–0.35 mm (e ka fetoloang)	E sebelisoa hangata bakeng sa li-lamination tsa mantlha tsa transformer
	Bophara	E ka fetoloa	Sekotjana ho latela litlhaloso tsa bareki
	Botenya	~7,650 kg/m³	E tloaelehileng bakeng sa tšepe ea silicon ea 3%
	Ntlha ea ho Lamination / Ntlha ea ho Bokella	≥0.96	E bontša ho kopana ha li-lamination tse bokellaneng
	Ho Koahela Bokaholimo	C‑5 kapa sekoahelo se tšoanang sa ho thibela mocheso	E fokotsa tahlehelo ea hona joale ea eddy ea interlaminar
Matlotlo a makenete	Tahlehelo ea Motheo (P)	0.8–1.2 W/kg (50 Hz, 1.7 T)	E lekoa ho latela ASTM A343; e fapana ho latela sehlopha
	Tlhahiso ea Magnetic (B8 / J800)	≥1.80–1.88 T	Likereiti tse phahameng tsa tlhahiso li ka fihlela litekanyetso tse phahameng
	Ho Lula ho Lekana (μᵣ)	1,000–1,800+	Tsela e phahameng ea ho pitikisa; e phahameng bakeng sa limaraka tsa Hi‑B
	Botsofali ba Magnetic / Tsitsiso	Ka har'a meeli e tloaelehileng	E netefatsa ts'ebetso e tsitsitseng ea nako e telele
Matlotlo a Mekaniki	Bokgoni ba ho sebetsa/Ho sebetsa hantle	E fihlela litlhoko tse tloaelehileng	E loketse ho phunya, ho koba le ho bokellana
Matlotlo a Mekaniki	Maemo a Teko	ASTM A343 / ASTM A804, jj.	Thepa ea mantlha e lekoa ho latela mekhoa e tloaelehileng

Tobetsa Konopo e ka ho le letona

Ikopanye le Rona bakeng sa Litlhaloso le Litekanyo tsa morao-rao tsa IEC 60404-8-4 Grain-Oriented (GO) Silicon Steel Coil le.

Tlanya mona

Kopo e ka Sehloohong

Sehlopha sa Kopo	Likopo tse Tloaelehileng	Lintlha
Li-Transformer tsa Matla	Li-lamination tsa mantlha tsa kabo le li-transformer tsa matla	E etselitsoe tahlehelo e tlase ea tšepe le ho kenella ha metsi ho phahameng ho fokotsa tahlehelo ea matla.
Li-Transformer tsa Lisebelisoa	Li-transformer tsa hona joale (CT), li-transformer tsa motlakase (VT)	Ho nepahala ho hoholo ha makenete ho nolofalletsa ho lekanya le ho lekanya ka nepo.
Limota tse Kholo tsa Motlakase	Li-lamination tsa rotor le stator tsa li-motor tsa AC	Tshebetso e ntlafetseng ya torque e fokotsa tahlehelo ya makenete mme e ntlafatsa bokgoni.
Lijenereithara	Li-core tsa lijenereithara tsa stator le rotor	Ho netefatsa hore motlakase o phalla ka bongata bo boholo lehlakoreng le phethohang ho fella ka katleho e phahameng.
Li-amplifier tsa makenete le li-inductor	Lisebelisoa tsa motlakase kapa lisebelisoa tsa makenete tse nang le maqhubu a phahameng	Ka ho sebelisa maemo a tahlehelo e tlase le a ho kenella ho phahameng, taolo e nepahetseng ea makenete e fihlelleha esita le ha ho na le masimo a makenete a sitisang.
Lisebelisoa tsa Matla a Nchafalitsoeng	Liturbine tsa moea, lijenereithara tsa motlakase oa metsi	Ho ntlafatsa bokgoni ba phetoho ya eneji ditsamaisong tsa matla a motlakase a tsitsitseng.
Lisebelisoa tse Ikhethang tsa Motlakase	Li-chokes, li-reactor le li-sensor tsa makenete	Ho fihlella tshebetso e nepahetseng ya makenete ka sebopeho se senyenyane, se kopaneng.

Tšebeliso ea koili ea tšepe ea silicon (1)

Tšebeliso ea koili ea tšepe ea silicon (2)

Melemo ea Sehlopha sa Tšepe sa Royal (Ke Hobane'ng ha Sehlopha sa Borena se Ikhetha Bakeng sa Bareki ba Amerika?)

1) Ofisi ea Lekala - tšehetso ea batho ba buang Sepanishe, thuso ea ho tlosa thepa ea lekgetho, jj.

2) Ho na le lithane tse fetang 5,000 tsa setoko, ka mefuta e fapaneng ea boholo

3) E hlahlobiloe ke mekhatlo e nang le matla a ho laela e kang CCIC, SGS, BV, le TUV, ka liphutheloana tse tloaelehileng tse loketseng ho sesa leoatleng

Ho paka le ho tlisa

Litšobotsi tsa ho paka

Tšireletso ea Meqolo: Karolo e ka hare ea thepa ea meqolo e entsoe ka tšepe kapa liphaephe tsa pampiri, ka litšireletso tsa sekhutlo kapa litšepe tsa sekhutlo tse ekelitsoeng mathōkong; bokaholimo bo koahetsoe ka pampiri e sa keneleng mongobo kapa filimi ea PE, 'me oli e thibelang mafome e ka sebelisoa ha ho hlokahala.

Mokhoa oa Tšireletso: Ho sebelisoa marapo a tšepe a matla a phahameng bakeng sa ho tlama; liphalete kapa literei tsa lehong li ka sebelisoa haeba ho hlokahala.

Ho kopanya (Boikhethelo): Meqolo e mesesaane e ka kopanngoa ka meqolo e mengata, ea aroloa ka pampiri ea karohano ho thibela ho ngoatheha, 'me ea koaheloa ka filimi ea polasetiki bakeng sa tšireletso.

Mekhoa ea Lipalangoang

Thepa ea Leoatleng: Sebelisa lijana tsa bolelele ba limithara tse 20/40, tse tiisitsoeng ka thata ka li-wedge tsa lehong.

Sepalangoang sa Terene: Teraka e bataletseng kapa sepalangoang sa terene, se tiisitsoe ka liketane kapa masakaneng.

Ho Sebetsana le ho Boloka

Sebelisa lihoko tsa khoele, lisebelisoa tsa ho phahamisa, kapa liforeimi tsa C ho thibela ho hula.

Lisebelisoa tsa moqolo li lokela ho bolokoa li otlolohile ho thibela ho fetoha le mafome.

Boloka sebakeng se omileng, se nang le moya o kenang hantle, 'me u se ke ua li beha holimo haholo.

Tšebelisano e tsitsitseng le lik'hamphani tsa ho romela thepa tse kang MSK, MSC, COSCO ka mokhoa o sebetsang oa ketane ea litšebeletso tsa thepa, ketane ea litšebeletso tsa thepa le thepa li tla u khotsofatsa.

Re latela maemo a sistimi ea taolo ea boleng ba ISO9001 ts'ebetsong eohle, 'me re na le taolo e tiileng ho tloha ho rekoeng ha thepa ea ho paka ho isa ho kemisong ea likoloi tsa lipalangoang.

Ho romelloa ha liphutheloana tsa tšepe tsa silicon

LBH

1. Ke eng hona hobaneng e sebedisetswa?
Tšepe ea silicon e shebaneng le lijo-thollo ke tšepe ea motlakase e nang le khabone e tlase, e nang le silicon e ngata e nang le lithollo tse otlolohileng ho latela tsela e bilikanang. Sena se netefatsa hore makenete a kenella habonolo le tahlehelo e tlase ea mantlha, e leng se etsang hore e be e loketseng li-transformer le lisebelisoa tsa motlakase tse bolokang matla.

2. Likopo tse tloaelehileng:
E sebelisoa ho li-transformer tsa motlakase le lisebelisoa, lienjene tse kholo, lijenereithara, li-reactor le lisebelisoa tsa matla a nchafatsoang moo ho hlokahalang bokhoni bo phahameng ba makenete.

3. Litšobotsi tsa bohlokoa:
Botenya: 0.18–0.35 mm (e ka fetoloang)
Tahlehelo ea mantlha: ~0.8–1.2 W/kg @ 50 Hz, 1.7 T
Ho kenya makenete (B8): ≥1.80–1.88 T
Ho kenella ha metsi ka tekanyo e itseng: 1,000–1,800+
Ntlha ea ho lamination: ≥0.96

4. Liphapang ho tloha tšepe ea silicon e sa shebaneng le eona:
Tšepe e shebaneng le lijo-thollo e shebile ka lehlakoreng, e ntlafalitsoe bakeng sa tataiso ea ho bilikisa (e molemo ka ho fetisisa bakeng sa li-core tsa transformer), ha tšepe e sa shebaneng le eona e le isotropic, e loketse mechine e potolohang joalo ka lienjene.

5. Malebela a ho sebetsana le ho boloka:
Qoba ho kobeha kapa ho bokellana ho senyang tsela eo lijo-thollo li sekametseng ka eona.
Boloka libakeng tse omileng, tse sa senyeheng.
Liaparo tse sireletsang mocheso (mohlala, C-5) li fokotsa tahlehelo ea motlakase oa eddy le ho sireletsa li-lamination.