page_banner

Galvanized Steel Sheet – Royal Group

galvanized steel sheet (6)
galvanized steel sheet (1)

Galvanized Steel Sheet

Galvanized steel sheet refers to a steel sheet coated with a layer of zinc on the surface. Galvanizing is an economical and effective rust prevention method that is often used, and about half of the world's zinc production is used in this process. 

 

Effect

Galvanized steel sheet is to prevent the surface of the steel sheet from corrosion and prolong its service life. A layer of metal zinc is coated on the surface of the steel sheet. This galvanized steel sheet is called galvanized sheet.

 

Dimensions

Specification Zinc Layer Material
0.20*1000*C 80 DX51D+Z
0.25*1000*C 80 DX51D+Z
0.3*1000*C 80 DX51D+Z
0.35*1000*C 80 DX51D+Z
0.4*1000*C 80 DX51D+Z
0.5*1000*C 80 S280GD+Z
0.5*1000*C 80 DX51D+Z
0.58*1000*C 80 S350GD+Z
0.6*1000*C 80 DX51D+Z
0.7*1000*C 80 DX51D+Z
0.75*1000*C 80 DX51D+Z
0.8*1000*C 80 DX51D+Z
0.8*1000*C 80 DX53D+Z
0.85*1000*C 80 DX51D+Z
0.9*1000*C 80 DX51D+Z
0.98*1000*C 80 DX51D+Z
0.95*1000*C 80 DX51D+Z
1.0*1000*C 80 DX51D+Z
1.1*1000*C 80 DX51D+Z
1.2*1000*C 80 DX51D+Z
1.2*1050*C 150 CSB
1.4*1000*C 80 DX51D+Z
1.5*1000*C 80 DX51D+Z
1.55*1000*C 180 S280GD+Z
1.55*1000*C 180 S350GD+Z
1.6*1000*C 80 DX51D+Z
1.8*1000*C 80 DX51D+Z
1.9*1000*C 80 DX51D+Z
1.95*1000*C 180 S350GD
1.98*1000*C 80 DX51D+Z
1.95*1000*C 180 S320GD+Z
1.95*1000*C 180 S280GD+Z
1.95*1000*C 275 S350GD+Z
2.0*1000*C 80 DX51D+Z
0.4*1250*C 80 DX51D+Z
0.42*1250*C 80 DX51D+Z
0.45*1250*C 225 S280GD+Z
0.47*1250*C 225 S280GD+Z
0.5*1250*C 80 SGCC
0.55*1250*C 180 S280GD+Z
0.55*1250*C 225 S280GD+Z
0.6*1250*C 80 DX51D+Z
0.65*1250*C 180 DX51D+Z
0.7*1250*C 80 DX51D+Z
0.7*1250*C 80 SGCC
0.75*1250*C 80 DX51D+Z
0.8*1250*C 80 DX51D+Z
0.9*1250*C 80 DX51D+Z
0.95*1250*C 80 DX51D+Z
1.0*1250*C 80 DX51D+Z
1.15*1250*C 80 DX51D+Z
1.1*1250*C 80 DX51D+Z
1.2*1250*C 80 DX51D+Z
1.35*1250*C 80 DX51D+Z
1.4*1250*C 80 DX51D+Z
1.5*1250*C 80 DX51D+Z
1.55*1250*C 80 DX51D+Z
1.6*1250*C 120 SGCC
1.6*1250*C 80 DX51D+Z
1.8*1250*C 80 DX51D+Z
1.85*1250*C 90 DX51D+Z
1.95*1250*C 80 DX51D+Z
1.75*1250*C 80 DX51D+Z
2.0*1250*C 80 DX51D+Z
2.0*1250*C 120 SGCC
2.5*1250*C 80 DX51D+Z

The relevant product standards list the recommended standard thickness, length and width of galvanized sheets and their allowable deviations. Generally speaking, the thicker the galvanized sheet, the greater the allowable error, rather than the fixed 0.02-0.04mm. The thickness deviation also has different requirements according to the yield, tensile coefficient, etc. The length and width deviation is generally 5mm, and the thickness of the plate Generally between 0.4-3.2.

 

Package

Divided into two kinds of galvanized sheet cut to length and galvanized sheet packaged in coils. Generally, it is packaged in iron sheet, lined with moisture-proof paper, and bound on the bracket with iron waist outside. The binding should be firm to prevent the internal galvanized sheets from rubbing against each other.

Post time: Jul-06-2023